With the rapid development of The Times, warehousing logistics as an industrial hub, the problem is becoming increasingly prominent, enterprises are more concerned about logistics efficiency and logistics costs, most of today's intelligent production + warehousing logistics intelligent manufacturing model, automated three-dimensional warehouse is also popular in the country.


The storage of medicine and food has certain requirements for the temperature and humidity control of the warehouse. Storage in accordance with storage conditions is the premise of ensuring the quality of goods. The selection of warehouse air supply technology has an important impact on temperature and humidity control, reducing investment costs, energy saving and consumption, and reducing warehousing and logistics costs.


With the rapid development of The Times, based on the research of the shortcomings of traditional air supply, the new fabric air duct has been successfully developed in recent years, and is widely used in cold chain cold storage, food and tobacco, machinery and electronics, light industry textile, medical storage, shopping malls and supermarkets, sports centers, automobile manufacturing, exhibition halls, etc. It has the following characteristics:


(1) Accurate air supply


Fiber fabric air duct through the controlled position of the orifice and jet nozzle out of the air, the maximum use of the cold and air volume sent by the air duct, accurate air supply range, can cover all the need for air supply point position. For example, the automatic three-dimensional warehouse stacker adopts jet nozzle for air supply in the roadway.


(2) Uniform air supply


The fiber fabric air duct is discharged through the fiber gap of the entire pipe wall or the uniform distribution of the hole, that is, the radial air supply along the pipe is linear, the axial air supply is fan, forming a three-dimensional air supply, the overall air supply is evenly distributed, there is no dead Angle of the air supply, which is 3-5 times the area under the traditional air duct.


(3) Convenient installation and short construction period


Fiber fabric air duct installation is convenient, high degree of systematization, the site only needs to be simply hung and connected, and fiber fabric bearing light, hanging on the steel rope through the hook, no need to heat preservation, and other pipeline conflict pressure does not affect the use, unlike the traditional air duct to do diameter reduction, elbow, up and down air duct, etc., the installation period can be shortened to one-fifth of the traditional way.


(4) Light weight


The weight of the fiber fabric duct is only 200~450g/㎡, which requires small load on the building structure, and the weight is only one-fortieth of the weight of the traditional duct.


(5) Anti-condensation, no insulation


The fiber fabric air duct makes full use of the air permeability characteristics of the fabric material, penetrates cold air through the whole pipe wall fiber, and forms a cold air layer outside the pipe wall under the action of wind pressure, so that there is no temperature difference between the inside and outside the pipe wall, and completely solves the problem of pipe condensation without insulation. The traditional air duct will not only produce condensation, but also need to be insulated, thus affecting the product.


(6) Energy saving


The fiber fabric air duct can speed up the circulation speed of the air flow in the warehouse, reach the required temperature in the warehouse in a short time, reduce the operation time of the equipment, run more energy-saving, and have better temperature uniformity.