In non-industrial air conditioning environments, comfort is undoubtedly a very important design requirement and final operation goal. However, in practice, it is not easy to achieve the target comfort level.


The reason is that the overall complexity of the air conditioning system leads to a large deviation between the inlet air volume and air pressure of the end air supply product and the design value, and the control ability of the end air supply product in mass production is very limited.


Various reasons eventually lead to many ills in the air conditioning environment, such as local wind feeling too strong caused discomfort, the control area between the wind speed deviation is very large, the local air speed is very small and the range is insufficient, the load in the air conditioning control area is not properly handled by the air conditioner, the air conditioning energy consumption is high but the indoor environment effect is very poor and so on seriously affect the indoor environment.


Air supply solution of MX fabric air duct: According to the project situation to develop a plan, develop different air supply mode, in order to achieve the environmental design requirements as the ultimate goal.


MX fabric air duct through professional design simulation calculation, choose the most reasonable air supply mode, to achieve uniform air supply in the length direction of the air duct, and achieve accurate control of air flow in the control area.