Project name: Guangdong Supply and marketing public agricultural products cold chain logistics infrastructure Guyu network - Guangdong Supply and Marketing Tianye (Lechang) cold chain logistics Park


Project address: Shaoguan City Lechang Changlai town Ankou village plot


Basic information of the project:


With a total construction area of 27,800 square meters, it is planned to build 1# comprehensive building, 2# cold storage, 3# processing workshop, fire pool pump room and refrigeration room. Equipment and supporting facilities: Purchase counterweight forklift truck, high forklift truck, pallet shelf refrigeration equipment, logistics platform supporting facilities, security weak current network, WMS information system and hardware to meet the normal operation needs of the project.


The planned land area of this project is 39755.08 square meters, and the construction content is mainly a comprehensive building, a cold storage and refrigeration room, a processing workshop, a fire pool and water pump room and outdoor supporting facilities. The total construction area is 27,800 square meters, of which the construction area of the 1# complex building is 4604.43 square meters, the construction area of the 2# cold storage is 8154.57 square meters, and the construction area of the 3# processing workshop is 13,560.28 square meters.


MultiXair Fabric Duct Design:


1. Scope of design: Design of air duct system of cold air machine in cold storage area.


Second, MultiXair fabric duct air supply system design:


1. MultiXair high permeability material is used to prevent frost formation on the surface of the system.


2. The chiller is composed of multiple fans in parallel. In order to reduce the impact and stabilize the air pressure of the system, a fabric plenum is designed for the part connected with the chiller. The wind speed in the plenum is lower than that of the duct, and part of the dynamic pressure is converted to static pressure, making the system more stable and balanced. It can also avoid the residual defrosting water blowing into the air duct and thus blowing into the material after defrosting. In order to facilitate the system deicing, the plenum is designed as an independent part and is connected with the chiller fan and the air duct by zipper.


3, Adopt MultiXair-S series D-shape semi-oval.


4, the use of double-row rail suspension system, fabric duct system at 3:9 to set the slide group, the track installed after the slide into the track groove can be set at the end of a separate track fixed to prevent fan start and stop caused by system movement, the top height of the duct 4.7 meters.


5. The wind speed of the plenum is controlled at 4~6m/s, and the wind speed at the entrance of the fabric duct system is controlled at 8~10m/s.


6. The air supply mode is infiltration air supply and orifice air supply. The orifice is designed in S-shaped cross arrangement, and the air supply coverage is wider. In order to avoid dry consumption caused by cold air blowing materials, the orifice Angle is designed at 55~85 degrees.


7. The inlet section of the fabric air duct system is set in the air outlet of the cooler and is tightly connected with the hoop.


Fabric air duct scene picture

MultiXair has accumulated experience in the design and implementation of fabric air ducts for various types of projects at home and abroad, and has summarized several sets of installation methods for different places. For more information, call 400-836-9929